How do you turn off the maintenance required light on a Toyota Tacoma?


What does it mean when maintenance required light is on Toyota?

The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

How do you reset the maintenance required light on a Toyota Tacoma 2020?

Reset the maintenance light of the 2020 Toyota Tacoma by turning ‘on’ the key position and turning the key back off. Afterward, push and hold the reset button, while turning the key back to the ‘on’ position. Continue holding the reset button until all of the zeros clear and the odometer reading returns.

READ  How much does 1/4 cow usually cost?

Can I drive with maintenance required light on?

Secondly, resetting the maintenance required light after you have changed the oil restarts the counter. As a result, you can drive safely on roads and after 5,000 miles, this light will automatically remind you it’s time for a new oil change, so you don’t have to count the miles manually.17 Jul 2019

How do you reset the maintenance required light on a 2011 Toyota Tacoma?

What does it mean when my Toyota says maintenance required?

What ‘MAINT REQD’ Means. The ‘MAINT REQD’ light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

Does maintenance required mean something is wrong?

The maintenance required light isn’t present in every vehicle on the market. While the maintenance required light doesn’t necessarily mean there’s something wrong with the car, you should still take it seriously if it pops up. Make sure you call your mechanic or dealership and schedule a service appointment.1 Oct 2018

How do you reset the maintenance light on a Toyota Tacoma 2021?

– Press the “Power” button once without holding the brake to activate the electronics.
– Use the Left and Right arrows to select the “Gear”
– Use the Up and Down arrows to select “Settings“, then press .
– Use the arrows to select “Maintenance Reset“, then press .
– Select “Yes“, then press .

How do you reset the maintenance light on a Toyota 2020?

How do you reset the maintenance required light on a Toyota Tacoma?

To reset the maintenance light put the vehicle in the ACC position. Then press and hold the trip reset button in the gauge cluster. While doing that put the vehicle to the on position without starting the engine. Keep holding that reset button until You see the maintenance light turn off on the dash.

READ  How many sliders are needed for an adult?

How do you reset the oil life on a 2020 Toyota Tacoma?

How do you turn off the maintenance required light on a Toyota Camry 2020?

– Turn the IGNITION ON.
– Press the ARROW BUTTON on Driver information button to navigate SETTING in Driver Information Display.
– Then use Down Arrow to Navigate VEHICLE SETTINGS.
– Then Navigate to SCHEDULE MAINTENANCE.
– The Confirmation message will appear.
– Turn Ignition OFF.

What does it mean when maintenance required light is on Toyota rav4?

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

What does service maintenance required mean?

The purpose of the maintenance required light is to encourage drivers to take their vehicle in for regular scheduled maintenance, such as oil changes, spark plugs, new tires, etc. Normally, automotive specialists will reset the maintenance required light when servicing your vehicle.24 May 2017

What does it mean when your car say maintenance required?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Most often this just means your vehicle might be due for an oil change.

How do you clear the maintenance required light on a Toyota Camry?

Push and hold the dashboard odometer button and turn the key to position two. Keep holding the odometer button until the maintenance light starts to flash. You might even hear beeping noises. The light should go out.

READ  How much does a normal casket cost?

How do you turn off the maintenance required light on a Toyota Highlander 2020?

– Turn on your car without starting the engine.
– Go to the ⚙️ Settings.
– Find the VEHICLE SETTINGS menu.
– Press and hold the OK button.
– Select SCHEDULED MAINTENANCE or OIL MAINTENANCE.
– Select YES.

How do you reset the maintenance required light on a 2013 Toyota Tacoma?

How do you reset the maintenance light on a Toyota Camry 2021?

Is maintenance required the same as check engine?

Some drivers may confuse the service required or maintenance required light on the gauge cluster for the check engine light. These warning lights are unrelated. The service required light just means the car is due for an oil change or other routine care.

How do you turn off the maintenance required light on a 2006 Toyota Tacoma?

Hold down the “Trip Odometer Reset” knob. Turn the ignition to the “On” position. Continue pressing on the “Trip Odometer Reset” knob until the odometer indicates “0000000” and the maintenance light goes off. Release the knob.

How do you turn off the maintenance required light on a 2007 Toyota Tacoma?